Selected Journal Articles
- Angatkina, O., A. Wissa, and A. Alleyne. "Path Following for an Origami-Enabled Soft Crawling Robot (OSCaR)," Submitted to IEEE Transaction on Mechatronics (under review)
- Chengfang Duan and A.A.Wissa, "Coverts-Inspired Flaps: Studying the Effects of Reynolds Number and Airfoil Geometry", AIAA Journal, 2021 (under review)
- O. Bolmin, J.J. Socha, M. Alleyne, A.C. Dunn, K. Fezzaa, A.A. Wissa, "Nonlinear elasticity and damping govern ultrafast dynamics in click beetles", PNAS (in press)
-
Lynch, M., B. Mandadzhiev, and A. Wissa, “Bioinspired Wingtip Devices: A Pathway to Improve Aerodynamic Performance During Low Reynolds Number Flight," Bioinspiration & Biomimetics (2018) 13 036003.
-
Mandadzhiev, M., Lynch, M., Chamorro L., and A. Wissa, (Invited), "An experimental study of an airfoil with a bio-inspired leading edge device at high angles of attack," Smart Materials and Structure (2017) 26 094008
-
Pagano, A., T. Yan, B. Chien, A. Wissa, and S. Tawfick (Invited) "A crawling robot driven by multi-stable origami" Smart Materials and Structure (2017) 26 094007. (This publication won the best paper award from ASME's ASMS Branch in Structural Dynamics and Control. This publication was also part of SMS Highlight Collection for 2017)
-
Wissa, A., J. Grauer, N. Guerreiro, Y. Tummala, C. Altenbuchner, J.E. Hubbard, Jr., M. Frecker, and R. Roberts, "Free Flight Testing and Performance Evaluation of a Passively Morphing Ornithopter," International Journal of MAVs (2015) 7(1):21-40.
-
Wissa, A., J. Calogero, N. Wereley, J. E. Hubbard, Jr., and M. Frecker, "Analytical Model and Stability Analysis of the Leading Edge Spar of a Passively Morphing Ornithopter Wing," Bioinspiration & Biomimetics (2015) 10 065003.
-
Tummala, Y., A. Wissa, M. Frecker, and J. E. Hubbard, Jr., "Design and optimization of a contact aided compliant mechanism for passive bending,” Journal of Mechanics and Robotics (2014) 6 031013.
-
Tummala, Y., M. Frecker, A. Wissa, and J. E Hubbard, Jr., "Design optimization of a twist compliant mechanism with nonlinear stiffness," Smart Materials and Structures (2014) 23 104011.
-
Tummala, Y., M. Frecker, A. Wissa, and J.E. Hubbard, Jr.,(invited), "Design and optimization of a bend-and-sweep compliant mechanism," Smart Materials and Structures (2013) 22 094019. (This publication won the best paper award from ASME's ASMS Branch in Structural Dynamics and Control)
-
Wissa, A., Y. Tummala, J. E. Hubbard, Jr., and M. Frecker, "Passively Morphing Ornithopter Wings using a Novel Compliant Spine: Design and Testing," Smart Materials and Structures (2012) 21 094028.
Articles in Conference Proceedings
-
Zekry D., C. Duan, M. Ito, and A. Wissa. “Design of Experiments for Two-and Three-Dimensional Bio-inspired Flow Control Devices”, AIAA SciTech 2021 Forum. January
-
Lee K., and A. Wissa "Dynamic characterization of a bio-inspired variable stiffness multi-winglet device", Proc. SPIE 11377, Behavior and Mechanics of Multifunctional Materials IX, 113770K. May
-
Ito, M, C Duan, L Chamorro, and A Wissa. "A Leading-Edge Alula-Inspired Device (LEAD) for Stall Mitigation and Lift Enhancement for Low Reynolds Number Finite Wings." Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2018-8170 San Antonio, TX. (Abstract and full draft paper were subject to peer review)
-
Angatkina, O, B. Chien, A. Pagano, T. Yan, A. Alleyne, S. Tawfick, and A. Wissa. "A Metameric Crawling Robot Enabled by Origami and Smart Materials," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2017-3836, Snowbird, UT. (Abstract and full draft paper were subject to peer review)
-
Pagano, A., B. Leung, T. Yan, B. Chien, A. Wissa, and S. Tawfick "Multi-Stable Origami Structure for Crawling Locomotion," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2016-9071, Stowe, VT. (Abstract and full draft paper were subject to peer review)
-
Waite, J., C. Duan, G. Reich, and A. Wissa "Computational Model for Application of Avian Covert Feathers to Aerial Vehicles," International Conference of Adaptive Structures and Technologies 2016, Bolton Landing, NY.
-
Mandadzhiev, B., M. Lynch, L. Chamorro, and A. Wissa "Alula-inspired Leading Edge Device for Low Reynolds Number Flight," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2016-9210, Stowe, VT.
-
Hasnain, Z., J. Hubbard Jr., J. Calogero, M. Frecker, and A. Wissa, "Understanding the Relationship Between Pitch Agility and Propulsive Aerodynamic Forces in bio-inspired Flapping Wing Vehicles,” Proc. Smart Materials, Adaptive Structures, and Intelligent Systems Conference, 2015-8835, Denver, CO.
-
Wissa, A., J. Calogero, and J. Hubbard, Jr., "Stability Analysis of the wing leading edge spar of a passively morphing ornithopter," Proc. Smart Materials, Adaptive Structures, and Intelligent Systems Conf. 2014-7528, Newport, RI.
-
Tummala, Y., M. Frecker, A. Wissa, and J. E. Hubbard, Jr., "Design optimization of twist compliant mechanism," Proceedings of Smart Materials, Adaptive Structures and Intelligent Systems Conference, 2013, Snowbird, UT.
-
Tummala, Y., M. Frecker, A. Wissa, and J. E. Hubbard, Jr., "Design and optimization of bend-and-sweep compliant mechanism," Proceedings of International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, 2013-12338, Portland, OR.
-
Tummala, Y., M. Frecker, A. Wissa, and J. E. Hubbard, Jr., "Design of bend-and-sweep compliant mechanism for passive shape change," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2012-7996, Stone Mountain, GA.
-
Wissa, A., Y. Tummala, J. E. Hubbard, Jr., M. Frecker, and A. Brown, "Testing of novel compliant spines for passive wing morphing," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2011-5198, Scottsdale, AZ.
-
Tummala, Y., A. Wissa, M. Frecker, and J. E. Hubbard, Jr., " Design optimization of a compliant spine for dynamic applications," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2011-5207, Scottsdale, AZ.
-
Tummala, Y., A. Wissa, M. Frecker, and J. E. Hubbard, Jr., "Design of a passively morphing ornithopter wing using a novel compliant spine," Proc. Smart Materials, Adaptive Structures and Intelligent Systems Conf. 2010-3637, Philadelphia, PA.